Specifications

Installing Diva Mobile for Windows NT
◆
◆◆
◆
29
To install and configure your adapter with
Award CardWare, Unicore CardWare, and Phoenix Cardware
1. Install CardWare as described in the manufacturer’s documentation.
2. Restart your notebook.
3. Plug the ISDN dongle into the adapter (see the illustration in ‘To install Diva Mobile
under Windows 98/Me/2000/XP’ on page 3).
4. After you logon to Windows NT, insert your adapter into an available PCMCIA TYPE
II slot.
5. In the displayed warning message box, click ‘Cancel’.
6. From the Windows NT system tray, click the ‘PC Card’ icon. Select ‘Edit’, then select
your adapter.
7. In the ‘Edit PC Card Associations’ dialog box, double-click ‘[Do Not Config]’ from
‘Defined’. Click ‘OK’.
8. Install the Diva Client software as described in ‘Installing Diva Mobile for Windows
NT’ on page 7.
To install and configure your adapter with SystemSoft CardWizard 4.x or 5.x
(Hot swapping is supported only with CardWizard 5.x)
1. Install SystemSoft CardWizard as described in the CardWizard documentation.
2. Restart your notebook.
3. Plug the ISDN dongle into the adapter (see the illustration in ‘To install Diva Mobile
under Windows 98/Me/2000/XP’ on page 3).
4. After you logon to Windows NT, insert your adapter into an available PCMCIA TYPE
II slot.
5. The following message is displayed: ‘A successful card insertion event has been
detected in a slot. This card is hot-swappable.’
6. Click ‘OK’.
7. Install the Diva Client software as described in ‘Installing Diva Mobile for Windows
NT’ on page 7.
To install and configure your adapter with
Softex PC Card Controller and Phoenix CardExecutive
Diva Mobile for Windows NT supports only Softex PC Card Controller version 2.34 or
higher (for information on how to verify the version number, see the Softex PC Card
Controller user's guide).
If you have an older version of Softex PC Card Controller, contact Softex to get the
necessary update:
e-mail: [e-mail]
phone: [phone]
fax:[phone]