Specifications

Configuring Diva Mobile for Windows XP
◆
◆◆
◆
23
Modifying your Diva Mobile configuration
In general, after you have installed the Diva Mobile hardware and software, you do not
need to further configure Diva Mobile except in the following cases:
• if you are located in North America or Japan, you will need to modify the switch type
and enter a service profile identifier (SPID), or;
• if you want to change any Diva Mobile settings, such as the ISDN phone numbers, or
install a virtual modem, after you have installed the card.
To change switch type, phone numbers, or ISDN properties
1. From the desktop, right-click ‘My Computer’, and then click ‘Manage’.
2. In the ‘Tr ee ’ tab, under ‘System Tools’, select ‘Device Manager’ and then, in the right
pane, expand ‘Network Adapters’.
3. Right-click the modem that you want to modify and then, on the shortcut menu that
appears, click ‘Properties’.
4. In the Diva Mobile Properties dialog box, click the ‘ISDN’ tab and select your switch
type or D-channel protocol.
5. Click ‘Configure’ and enter the appropriate information. For example, you may need
to enter new ISDN phone numbers or, in North America, a new SPID.
6. Click ‘OK’.
Select your switch type or
D-channel protocol, and then
click ‘Configure’.
Select your switch type or
D-channel protocol, and then
click ‘Configure’.