Specifications

Configuring Diva Mobile for Windows 2000
◆
◆◆
◆
16
14. Click ‘Next’.
15. If you want to set up an email account, click ‘Ye s ’, click ‘Next’, then follow the on-screen
instructions.
If you do not want to set up an email account, click ‘No’, then click ‘Next’.
16. When you have finished configuring your connection, click ‘Finish’ to close the ‘Internet
Connection Wizard’. You now have a shortcut to connect to the Internet.
Note: If your Internet service provider requires you to configure additional properties,
follow the instructions specified by your provider.
Configure Multilink PPP (optional)
(For ISDN connections only) If your Internet service provider supports Multilink PPP, you
can use both B-channels to attain a connection speed of 128 kbps. Since Multilink PPP
connections use both B-channels, the cost of your connection will increase.
1. Click ‘Start > Settings > Network and Dial-up Connections’. Right-click the entry for
your Internet connection, and then select ‘Properties’.
2. In the ‘Properties’ dialog box, click the ‘General’ tab.
3. From ‘Connect using’, make sure that both ISDN channels for the Diva Mobile are
selected.
4. If both of your B-channels must call the same number (for the connection), select ‘All
devices call the same numbers’.
If the second B-channel dials a dshifferent ISDN number, type the ISDN number in
‘Phone number’.
5. Click the ‘Options’ tab and, under ‘Multiple devices’, select one of these options:
•‘Dial all devices’: Select this option if you always want to use both of your B-channels
for the connection.
•‘Dial devices only as needed’: Select this option if you want to use both of your
B-channels only when required. To configure additional settings for this option, click
‘Configure’ (refer to the Windows 2000 online help for descriptions of the options
in the displayed dialog box).
Note: This option can be used only if it is supported by your ISP.
•‘Dial only the first available device’: Select this option if you want to use the first
available B-channel.
6. Click ‘OK’ to close the ‘Properties’ dialog box for your connection.
To connect to the Internet:
After you have set up the connection to your Internet service provider as described
previously, you can connect to the Internet.
1. To connect to the Internet, launch your Web browser or email application. A dialog
box appears that prompts you to connect.
Note: If you want to automatically connect to the Internet each time you start your
Web browser or email application, select ‘Connect automatically’.