Specifications

Configuring Diva Mobile for Windows 98/Me
◆
◆◆
◆
10
Configure the connection
1. In Dial-up Networking, open the properties dialog box for your connection: right-click
the icon you just created for your connection, then click ‘Properties’.
2. Verify that the settings in the properties dialog box match those provided by your ISP
(or network administrator).
3. Click ‘OK’ to close the dialog box for your connection.
Configure Multilink PPP (optional)
(For ISDN connections only) If your Internet service provider or the remote server supports
Multilink PPP, you can use both B-channels to attain a connection speed of 128 kbps.
Since Multilink PPP uses both B-channels, the cost of your connection will increase.
1. In the properties dialog box for your connection, click the ‘Multilink’ tab, click ‘Use
additional devices’, and then click ‘Add’.
2. In the ‘Edit Extra Device’ dialog box, do the following:
3. Click ‘OK’.
4. In the dialog box for your connection, click ‘OK’.
To connect to the Internet:
1. Open Dial-Up Networking as follows:
In Windows 98, on the Desktop, double-click ‘My Computer’ and then double-click
‘Dial-Up Networking’.
In Windows Me, click ‘Start > Settings > Dial-Up Networking’.
2. Double-click the icon for the connection you created.
3. In the ‘Connect To’ dialog box, Enter your user name and password. By default, your
Windows logon user name is entered.
4. Click ‘Connect’. When the connection is established, the ‘Connected to’ dialog box
appears. You can now browse the Internet, check your email, etc.
To disconnect:
To disconnect, click ‘Disconnect’ in the ‘Connected to’ dialog box. If the ‘Connected to’
dialog box is minimized, double-click its icon from the system tray.
Select ‘Eicon Channel 1’.
Then, enter the phone number that you want the second B-channel to dial.