User`s guide

Appendix C: Command Line Reference Time Protocol
185
Time Protocol
SET TIMEPROTOCOL SERVER timeServer
Valid context: General
Use this command to automatically update the DIVA LAN ISDN Modem internal clock using a time server.
timeServer: IP address of the time server.
SET TIMEPROTOCOL ZONE timeZoneDiff
Valid context: General
Specifies the difference between your time zone and Greenwich mean time (GMT) in hours. Range: -12 to 12.
ENABLE TIMEPROTOCOL
DISABLE TIMEPROTOCOL
Valid context: General
Enables or disables the use of the time protocol. When enabled, the DIVA LAN ISDN Modem will periodically
contact a time server to retrieve the correct time and set its internal clock to match.
SHOW TIMEPROTOCOL CONFIGURATION
Valid context: General
Display time protocol settings.
UDP
SHOW UDP STATISTICS
Valid context: General
Displays UDP statistics.
SHOW UDP TRACE [memsize [framesize]]
Valid context: General
Starts or displays an UDP trace.
memsize: The amount of RAM reserved to store the trace on the DIVA LAN ISDN Modem. Range: 1 to 63 KB
. Default: 16 KB
framesize: Number of characters to show for each frame.
STOP UDP TRACE
Valid context: General
Stops an active UDP trace.
V. 12 0
ENABLE V120
DISABLE V120
Valid context: Profile/PPP
Enables or disables the V.120 protocol for the current profile.