User`s guide

Appendix C: Command Line Reference PPP
180
SET PPP MAXRETRY number [2ndchannel]
Valid context: Profile/PPP
Sets the maximum number of attempts this profile makes to establish a connection with this profile. When this
limit is reached, the DIVA LAN ISDN Modem places the profile in the "failed" state and a backup profile, if
defined, is dialed.
To automatically reset the profile, use the command SET PPP RESTOREDELAY. To reset the profile
manually, dial it or reset the DIVA LAN ISDN Modem.
number: Number of times the DIVA LAN ISDN Modem will attempt to activate the ISDN link. Range: 0 to
250. Default: 25.
2ndchannel: If this profile supports, BACP, this parameter sets the number of times BACP will attempt to
activate the second B-channel.
SET PPP RESTOREDELAY interval
Valid context: Profile/PPP
Automatically restores a profile from "failed" state to "ready" state after the specified number of seconds.
interval: Time to wait before restoring the profile to ready state. Range: 0 (do not restore), 300 - 65535 seconds.
SET PPP RETRYDELAY interval
Valid context: Profile/PPP
Sets the amount of time the DIVA LAN ISDN Modem waits after a failed connection attempt, before retrying.
SHOW PPP CONFIGURATION
Valid context: Profile/PPP
Displays the current PPP configuration settings.
SHOW PPP STATISTICS
Valid context: General
Displays PPP statistics.
SHOW PPP STATUS
Valid context: Profile/PPP
Displays PPP status.
SHOW PPP TRACE [port[mask] [memsize [framesize]]]
Valid context: Profile/PPP
Starts or displays an already started PPP trace for an ISDN channel.
memsize: The amount of RAM reserved to store the trace on the DIVA LAN ISDN
Modem. Range: 1 to 63 KB . Default: 16 KB
framesize: The number of characters to display in each frame.
STOP PPP TRACE [port]
Valid context: Profile/PPP
Stops a PPP trace for an ISDN channel.