User`s guide

DIVA T/A ISDN Modem User’s Guide
◆
Page 18
Windows 95/98/NT Installation and Setup
6
Select ‘Eicon DIVA T-A ISDN Modem’, then click ‘Next’.
7
Select the appropriate COM Port the DI VAT/A is connected to. Click ‘Next’, then click
‘Finish’.
8
Close the ‘Modem Properties’ window.
9
After closing the ‘Modem Properties’ window, you are prompted to configure Dial-Up
Networking, as the install modem list has changed. Click ‘Yes’ to configure Dial-Up
Networking.
10
From the ‘Remote Access Setup’ window, remove any unused devices that use the same
COM port as the DIVA T/A, and then click ‘Add’.
11
In the ‘Add RAS Device’ window, select the Eicon DIVA T/A ISDN Modem from the
drop-down list and click ‘OK’.
12
From the ‘Remote Access Setup’ window, click ‘Continue’. You will be prompted to shut
down and restart your computer. Click ‘No’. Do not restart your system.
13
Go to “Installing the DIVA Software”
on page 20.