User`s guide

DIVA T/A ISDN Modem User’s Guide
◆
Page 16
Windows 95/98/NT Installation and Setup
Windows NT 4.0
RAS Recommended
Before you begin installing the DIVA T/A, we suggest that the Remote Access Service (RAS),
also known as Dial-Up Networking, be installed with at least one modem. Any modem will
do; it is only needed to install the DIVA T/A and can later be removed.
Setup Instructions
Follow these steps to set up the DIVA T/A under Windows NT 4.0.
1
Power on your PC with all cables connected (see page 7
for instructions).
2
Insert the DIV AT/A CD into your computer's CD drive.
3
Click ‘Start’, ‘Settings’, ‘Control Panel’, then double-click the ‘Modems’ icon. If you have
previously installed a modem, the ‘Modem Properties’ window opens; click ‘Add’. If you
have not previously installed a modem, go to step 4.