Specifications

Across the Boards

Communications Device Drivers
Section 6 - MAINCON Driver Configuration
Page 229
cfSOFTWARE Confidential,

2000
6.6 MAINCON Panel B4
IDEAcomm
Configuration filename: MAINCFG.IDE
Used by cf Device Drivers:
#
Name Description
5 CFXIDEX IDEA Card
__________________
ACROSS-THE-BOARDS(r) Config
__________________
------------- IDEA 3278/9 --------------
IDEAcomm RAM address (in hex)........... FFF0
If RAM address changed from FFF0 (1FF0 on PS/2s), enter new RAM address here.
Note: If the IDEA software is earlier than v4.3, use the card in Irma mode.
F10: write config to disk Esc: Exit
1. Shared RAM Address
The IDEA coax card allows the base shared RAM address to be configured. If it has been changed from
D000, this field must be configured.