Specifications

Across the Boards

Communications Device Drivers
Section 6 - MAINCON Driver Configuration
Page 262
cfSOFTWARE Confidential,

2000
6.18 MAINCON Panel D5, TTY and PC-to-PC(continued)
4. Parity
‘E’ = Even, ‘O’ = Odd, ‘S’ = Space, ‘M’ = Mark, and ‘N’ = None.
5. Data Bits
‘7’ or ‘8’ data bits.
6. Stop Bits
‘1’ or ‘2’ stop bits.
7. Main Esc
CFXTTYX use only. Leave this field set to blank. When set, this field defines a character which, when
received in combination with certain other characters, will cause an error to be returned to DIALOG (and
thus to the application), therefore allowing a primitive form of “escape” processing to occur. The DIALOG
“ON EVENT” statement, when combined with a “QUIT” statement, provides this functionality in a more
general and standard way. This is supported for compatability with existing applications only.