Specifications

22 Regulatory information for Australia
Regulatory information for Australia
• This customer equipment shall only be installed in a PC that requires the
use of a tool to gain access to internal parts (e.g. this customer equipment
must not be installed in a PC with a ‘flip lid’).
• Proper installation of the Eiconcard C2x card requires that it is screwed to
the metal backplate of the computer. This ensures proper grounding, which
is necessary for safety purposes.
• This customer equipment may only be installed in host equipment where
there is at least 2 mm of air gap between the customer equipment and
adjacent boards (PCBs).
• Only ACA permitted line cord set(s) or made from ACA certified compo-
nents shall be used as replacements with this customer equipment.
Eiconcard C2x
Warning: This customer equipment is to be installed and maintained
by service personnel as defined by AS/NZS 3260 Clause 1.2.14.3
Service Personnel. It may be hazardous if your computer is not
properly plugged in and grounded.