Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Diagnostics
Page 2-50Conducting Diagnostics
2
1. Starting at the Lucent INTUITY Main menu (Figure 2-1), select
The system displays the Send & Receive Test Packets From window
(Figure 2-43
).
Figure 2-43. Send and Receive Test Packets Window
2. Enter the Internet Protocol (IP) address of the Lucent I
NTUITY system ( not a
PC address).
For this information, see the TCP/IP Administration screen.
3. Press (Save).
The system displays the message
working...
in the upper right corner
of the screen. While the cursor flashes, the system is performing the test.
When finished, the system displays the Test Packets Results window
(Figure 2-44
). This screen shows the results of sending 10 test packets
from the Lucent I
NTUITY system to itself.
>Send & Receive Test Packets
> TCP/IP Diagnostics
>
Diagnostics
> Customer/Services Administration
F3