Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance
585-310-186
Issue 3
October 1997
Diagnostics
Page 2-47Conducting Diagnostics
2
To busy-out the switch link, do the following:
1. Starting at the Lucent I
NTUITY Main menu (Figure 2-1), select
The system displays the Diagnose Switch Link window (Figure 2-38
).
2. Press (Chg-Keys).
3. Press (Busyout).
The system displays the Confirm window (Figure 2-40
).
Figure 2-40. Confirm Window
!
CAUTION:
The DCIU board is currently in use. Removing it from service will
disable all lines associated with DCIU, including all voice lines.
Subscribers calling will hear a fast busy signal. Callers sent to
coverage will hear ring/no answer.
4. Press y
The system displays a Busyout Command Output window (Figure 2-41
).
> Switch Interface Diagnostics
>
Diagnostics
> Customer/Services Administration
F8
F2