Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Diagnostics
Page 2-45Conducting Diagnostics
2
4. Select
The diagnostic test takes about one minute. The word
working
appears
in the upper right corner of the screen.
Diagnostic Results
If the diagnosis of the DCIU circuit card is successful, the system displays the
following series of messages.
EiconCard Self-Test Utility
ectest 3.03 Rev. 08
Copyright (c) Eicon Technology Corporation 1995. All
Rights Reserved.
-------------------------
Card #1: EC C20
ectest: Warning #FA304
The application software running on EiconCard #1 was
stopped.
CARD CONFIGURATION:
I/O Port Address : 240
Interrupt Request Level : 12
Memory size : 1024K
CARD DIAGNOSTIC
In progress...
EiconCard EC C20, Diagnostic: Passed
-------------------------
DIAGNOSTIC SUMMARY:
Card #1: Success.
-------------------------
NOTE:
Not all of the information displayed by the diagnostics appears in the
first Command Output window. You must scroll down the window
using the function keys.
If the diagnostics fail, replace the DCIU circuit card. See “DCIU Circuit Card
” in
Chapter 5, ‘‘Replacing or Installing Circuit Cards’’
.
> Board