Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Diagnostics
Page 2-40Conducting Diagnostics
2
13. Place the cursor on
Internal Loopback
.
14. Press .
The system displays the Internal Loopback window (Figure 2-35
).
Figure 2-35. Internal Loopback Window
Serial Port Send Test
The Send test simply writes a continuous stream of printable alphanumeric
characters to the specified port. This is helpful when a new device is being
added to the system and a continuous stream of data is required to resolve
wiring issues.
To perform the serial port send test, do the following:
1. Starting at the Lucent I
NTUITY Main menu (Figure 2-1), select
2. Press .
The system displays the Prompt window (Figure 2-28
).
ENTER
Send
>Diagnostics
> Serial Port Diagnostics
> Diagnostics
> Customer/Services Administration
ENTER