Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Diagnostics
Page 2-27Conducting Diagnostics
2
Networking Board Reset
This section provides instructions for resetting the ACCX card.
Requirements.
The card may need to be reset after other networking diagnostic
tests have been performed. In addition, the card may need to be reset as part of
an alarm repair procedure.
Procedure.
To reset the networking card, do the following:
1. Starting at the Lucent I
NTUITY Main menu (Figure 2-1), select
The system displays the Networking Diagnostics window (Figure 2-9
).
2. Press (Chg-Keys).
3. Press (Diagnose).
The system displays the Networking Diagnostics menu (Figure 2-10
).
4. Select
The system displays the Networking Board Reset window (Figure 2-20
).
Figure 2-20. Networking Board Reset Window
5. Enter the number of the ACCX card to be reset.
The Lucent I
NTUITY system resets the networking card. The process takes
several minutes. When the process completes, the system displays the
Test Results window (Figure 2-21
).
> Networking Diagnostics
> Diagnostics
> Customer/Services Administration
F8
F4
> Networking Board Reset