Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Diagnostics
Page 2-24Conducting Diagnostics
2
Operation.
The test operates in the following manner.
■ To perform the test, specify the channel number and data rate and start
the channel in network loop-around mode.
■ Notify the SO to send information to the channel to be tested.
■ The SO sends a message which loops through the INTUITY AUDIX Digital
Network and returns to the SO.
■ The SO checks the message to verify that the same information sent was
returned by Lucent I
NTUITY.
Procedure.
To perform a network loop-around test, do the following:
1. Starting at the Lucent I
NTUITY Main menu (Figure 2-1), select
The system displays the Networking Diagnostics window (Figure 2-9
)
2. Press (Chg-Keys).
3. Press (Diagnose).
The system displays the Networking Diagnostics menu (Figure 2-10
).
4. Select
The system displays the Start Network Loop-Around Test window
(Figure 2-16
).
> Networking Diagnostics
>
Diagnostics
> Customer/Services Administration
F8
F4
>
Start Test
> Network Loop-Around Test