Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Diagnostics
Page 2-17Conducting Diagnostics
2
Requirements
The following requirements are necessary to perform a remote connection test:
■ The remote machine name is needed
■ The channel can be DCP or RS-232
■ The channel must be equipped
Procedure
To perform a remote connection test, do the following:
1. Starting at the Lucent I
NTUITY Main menu (Figure 2-1), select
The system displays the Networking Diagnostics window (Figure 2-9
).
Figure 2-9. Networking Diagnostics Window
2. Press (Chg-Keys).
3. Press (Diagnose).
The system displays the Networking Diagnostics menu (Figure 2-10
).
> Networking Diagnostics
> Diagnostics
> Customer/Services Administration
F8
F4