Instruction manual

INTUITY Messaging Solutions Release 4

MAP/5P Maintenance

585-310-186

Issue 3

October 1997

Diagnostics

Page 2-10Conducting Audits

Figure 2-5. Confirm Audit Window

5. Press

NOTE:

The audit takes approximately 5 minutes.

6. Press (Chg-Keys).

7. Press (View_Res).

If the audit is successful the system displays the following message:

Networking Database Audit completed successfully.

If the audit fails, the system displays the following message:

Networking Database Audit failed.

If a failure message appears, look for related alarms such as NW

SOFTWARE-1004. Follow the repair actions for any active alarms as

appropriate. See “Accessing the Alarm Log” in Chapter 1, “Getting

Started,” in

Lucent I

NTUITY

Messaging Solutions Release 4 Alarms and

Log Messages

585-310-566

for the procedure.

Platform User Database Audit

Because the Lucent INTUITY system switch integration software acts as the

interface between the applications and the switch, the Lucent I

NTUITY system

switch integration database must periodically be synchronized with the

applications’ databases. The Station Manager Subscriber Database audit

performs this synchronization.

The Lucent I

NTUITY system switch integration database monitors the applications

with which each user is registered. When the audit is executed, the station

manager matches its user’s extension and MWL status with each user

application database. When successful matches are made, the audit progresses

to the next user. If a match is not found, a message is printed in the audit report

(see below).