Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Diagnostics
Page 2-8Conducting Audits
2
■ Result — This field displays a 1-character code that indicates the last
result of the named audit, and up to 20 characters of text of additional
audit-result information. Table 2-3
lists the result codes and their
meanings.
If the Audit Fails
If the audit fails, do the following:
1. Resolve any active alarms and rerun the audit. See Chapter 1, “Getting
Started,” in
Lucent I NTUITY Messaging Solutions Release 4 Alarms and
Log Messages
585-310-566, for the alarm resolve procedure.
2. If the audit fails again, contact the remote service center.
3. If the system is not providing service and the remote service center cannot
help immediately, restart the system using the ‘‘Rebooting the System’’
,
procedure in Chapter 3, ‘‘Common System Procedures’’
.
Auditing Networking Databases
The networking database consists of two parts: the networking administration
database and the remote subscriber update status database. The networking
administration database contains data relevant to the following areas:
■ Connectivity to other Lucent INTUITY systems and AMIS machines
■ Local machine connectivity
■ Channel configuration information
The remote subscriber update status database contains the information used by
the Lucent I
NTUITY system to request and send remote updates of subscriber
information.
Table 2-3. Auditing Result Codes
Code Meaning
blank Audit has not been executed.
R Audit is running.
P Last audit passed.
F Last audit failed.
A Last audit aborted.