Instruction manual
INTUITY Messaging Solutions Release 4
MAP/5P Maintenance
585-310-186
Issue 3
October 1997
Glossary
Page GL-10
DCE
See
data communications equipment
.
DCIU
See
data communications interface unit
.
DCP
See
digital communications protocol
.
DCS
See
distributed communications system
.
debug
See
troubleshooting
.
dedicated line
A communications path that does not go through a switch. A dedicated (hard-wired) path can be
formed with directly connected cables. MPDMs, DSUs, or other devices can also be used to
extend the distance that signals can travel directly through the building wiring.
default
A value that is automatically supplied by the system if no other value is specified.
default community
A group of telephone users administered with restrictions to prevent them from sending messages
to or receiving messages from other communities. If a system is administered to use communities,
the default community is comprised of all the AUDIX users defined on that system.
default print number
The user-administered extension to which autoprinted faxes are redirected upon their receipt into
the user’s mailbox. This default print destination is also provided as a print option when the user is
manually retrieving and printing faxes from the mailbox.
delivered message
A message that has been successfully transmitted to a recipient's incoming mailbox.
demand testing
Testing performed on request (usually by service personnel).
diagnostic testing
A program run for testing and determining faults in the system.
dial-ahead/dial-through
The act of interrupting or preceding I
NTUITY AUDIX system announcements by typing (buffering)
touch-tone commands in the order the system would normally prompt for them.
dial string
A series of numbers used to initiate a call to a remote AMIS machine. A dial string tells the switch
what type of call is coming (local or long distance) and gives the switch time to obtain an outgoing
port, if applicable
dialed number identification service (*DNIS_SVC)
An available channel service assignment on the Lucent I
NTUITY system. Assigning this service to a
channel permits the Lucent I
NTUITY system to interpret information from the switch and operate the
appropriate application for the incoming telephone call.
DID
See
direct inward dialing
.