Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Disaster Recovery Checklists
Page D-10Disaster Recovery Checklists
D
Place the reconfigured Hard Disk Drive 1 in the
slot reserved for Hard Disk Drive 0.
“Hard Disk Drive 0
Installation” in Chapter 6,
‘‘Replacing the Hard Disk
Drive’’
Place the new Hard Disk Drive 0 in the slot
reserved for Hard Disk Drive 1.
“Hard Disk Drive 1
Installation” in Chapter 6,
‘‘Replacing the Hard Disk
Drive’’
Initialize the new Hard Disk Drive 0. “Initializing the New Hard
Disk Drive 0” in Chapter 6,
‘‘Replacing the Hard Disk
Drive’’
Restore both hard disk drive SCSI IDs. “Restoring the SCSI IDs” in
Chapter 6, ‘‘Replacing the
Hard Disk Drive’’
Reboot the system. “Rebooting the System” in
Chapter 3, ‘‘Common
System Procedures’’
View the features option screen to verify that all of
the customer features purchased are activated.
Contact your remote maintenance center if there
are any discrepancies.
Check the system date and time. “Verifying the Date and
Time” in Chapter 3,
‘‘Common System
Procedures’’
Place test calls to the system to verify installation.
Perform alarm origination test or ask your remote
maintenance center to dial in to ensure that they
can connect.
Table D-5. Checklist for Systems with New Hard Disk Drive 0 and Existing Hard Disk
Drive 1 — Continued
✓ Task Source
Continued on next page