Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Troubleshooting
Page 1-11Tip/Ring Circuit Card Is Not Recognized by the Lucent I NTUITY System
1
Tip/Ring Circuit Card Is Not
Recognized by the Lucent I
NTUITY
System
Table 1-13. Tip/Ring Circuit Card Is Not Recognized by the Lucent INTUITY System
Possible Cause Check/See Probable Fix
The Tip/Ring card has
incorrect switch settings.
Check the switch settings
on the Tip/Ring cards. See
‘‘Tip/Ring Circuit Cards’’
, in
Chapter 5, ‘‘Replacing or
Installing Circuit Cards’’ for
the correct settings.
Correct the switch settings.
The Tip/Ring cards are
incorrectly numbered.
There is nothing to check in
this instance. If this is the
suspected problem
continue with the probable
fix.
Renumber the Tip/Ring
circuit cards by doing the
following:
This will start and stop the
voice system.
1. Starting at the Lucent
I
NTUITY Main menu,
select
2. Press
(Chg-Keys).
3. Select
Renumber
.
4. Press (Renumber).
Continued on next page
> Voice System Admin.
> Voice Equipment
F8
F2