Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Installing an RFU
Page 11-6Installing an RFU
11
5. Press .
The system displays the following message:
Processing of <Remote Field Update
X for IP xx > is
completed.
Insert a cartridge into Tape Drive 1.
Type [go] when ready
or [q] to quit: (default: go)
6. Enter
q
7. Remove the tape labeled “Lucent I
NTUITY RFU Software Update” from the
tape drive. See “Removing the Cartridge Tape
” in Chapter 3, ‘‘Common
System Procedures’’,” for the procedure.
8. Shut down and reboot the system. See “Shutting Down and Rebooting the
Lucent Intuity System” in Chapter 3, ‘‘Common System Procedures’’,” for
the procedure.
Verifying the RFU Installation
1. Starting at the Lucent INTUITY Main menu and (Figure 11-1), select
The system displays the View Installed Software window (Figure 11-4
and
Figure 11-5
).
ENTER
> View Installed Software
> System Verification
> Customer/Services Administration