Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Installing an RFU
Page 11-4Installing an RFU
11
NOTE:
In Figure 11-2 that number is 1.
If there is no RFU listed, enter
q
to quit and see ‘‘Installing a New RFU’’
to
install the new RFU.
6. Press .
The system displays the following message:
Select package(s) you wish to process (or ‘all’ to
process all packages). (default: all) [?,??,q]
7. Enter the number of the RFU package.
The system displays the name and version number for the package
selected as shown below for the sample screen in Figure 11-2
:
Remote Field Update C for IP16 (486) 1.0-16
8. Enter
y
The system removes the existing RFU.
NOTE:
If the system displays any messages warning of dependencies,
enter
y
again to continue with the software removal.
9. Press .
10. Continue with the next procedure, ‘‘Installing a New RFU’’
.
Installing a New RFU
NOTE:
The letter x’s that appear in the examples represent the IP load number for
the software and the letter designation (a, b, c,...) for the RFU.
1. Starting at the Lucent I
NTUITY Main menu (Figure 11-1) select
The system displays the Software Install menu (Figure 11-3
).
CONTROL D
ENTER
>Software Install
> UNIX Management
> System Management
> Customer/Services Administration