Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Installing the Optional Feature Software
Page 10-9Installing I NTUITY Lodging Software Packages
10
Installing the Optional Lodging Language
Package
To install the optional Lodging Language package, do the following:
1. Starting at the Software Install menu (Figure 10-2
), select
The system displays the following message:
Insert a floppy disk into the diskette drive
Type [go] when ready
or [q] to quit: (default: go)
2. Press .
The system displays the following message:
Installation in progress. Do not remote the diskette.
The following sets are available:
1 useng Intuity Lodging Language Package
(586) 2.0-1
Select package(s) you wish to process (or ‘all’ to
process all packages). (default: all) [?,??,q]
3. Press .
The system displays the following message:
Processing:
Set: Intuity Lodging Language Package (useng) from
<ctape1>.
Intuity Lodging Language Package
(i486)
Using </> as the package base directory.
When the process is finished, the system displays the following message:
Installation of <useng> is completed.
Insert a into Floppy Drive 1.
Type [go] when ready,
or [q] to quit: (default:go)
4. Enter q
5. Start the voice system. See “Starting the Voice System
” in Chapter 3,
‘‘Common System Procedures’’, for the procedure.
6. The Fax for Lodging feature option must be activated. Contact your
remote maintenance service center.
> Floppy drive
ENTER
ENTER