Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Installing Lucent™ INTUITY™ System Software
Page 9-5Installing the Lucent I NTUITY System Default Announcement Set and/or Optional
9
Installing the Lucent INTUITY System
Default Announcement Set and/or
Optional Language Package
Announcement Sets
Use the following procedure to install both the system default announcement set
and any optional language (announcement set) packages.
!
CAUTION:
Do not install optional language announcement sets from earlier or later
Lucent I
NTUITY releases. All optional language tapes used with the Lucent
I
NTUITY system R4.0 should be labeled 4.0 and installed with I NTUITY AUDIX
R4.0.
1. Starting at the Lucent INTUITY Main Menu (Figure 9-1), select
The system displays the Software Install menu (Figure 9-2
).
2. Insert the cartridge tape labeled “System Announcements” into the tape
drive. See “Inserting the Cartridge Tape
” in Chapter 3, ‘‘Common System
Procedures’’, for the procedure.
3. Select
Tape drive
.
The system displays the following message:
Insert a cartridge into Tape Drive 1.
Type [go] when ready,
or [q] to quit: (default:go)
>Software Install
> UNIX Management
> System Management
> Customer/Services Administration