Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Installing Base System Software
Page 8-30Installing the Switch Interface Software Packages
8
Installation in progress. Do not remove the cartridge.
The following sets are available:
1 VBPCset VB-PC Switch Integration Set
(;486)
Select package(s) you wish to process (or ‘all’ to
process all packages). (default: all) [?,??,q]
6. Press .
The system displays the following message:
Processing:
Set: VB-PC Switch Integration Set (VBPCset) from
<ctape1>.
VB-PC Switch Integration Set
(i486)
Using </> as the package base directory.
The following types of host switches are available.
They are:
1) NORTEL MERIDIAN 1
The system displays several status messages, then the following
message:
Insert a cartridge into Tape Drive 1.
Type [go] when ready
or [q] to quit: (default: go)
7. Enter
q
8. Enter
cd /
9. Enter
shutdown -y -g0 -i6
The system displays the following message:
Shutdown started. Date
INIT: New run level: 6
The UNIX Operating kernel will be rebuilt now.
This will take some time. Please wait.
The system responds with a series of memory check displays and
copyright notices. These messages also note that the system is fine and
coming up, the system is ready, and that the voice system is automatically
being started.
This reboot is finished when the system displays the following message:
Startup of the Voice System is complete
10. Press .
ENTER
ENTER