Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Installing Base System Software
Page 8-21Installing UnixWare
8
Figure 8-18. Insert Lucent INTUITY Tape Screen
3. Press .
This will accept the default of 1 to indicate the tape has been inserted and
is ready for access.
The system displays the following message:
Installation in progress. This will take several
minutes. Please do not remove the tape.
The system displays a series of informational messages.
When all files are loaded, the system displays the following message:
The system is ready.
The system’s name is Lucent Intuity.
Welcome to USL UnixWare System V Release 4.2 Version 1
Console Login:
NOTE:
Ignore the following message, if it is displayed:
Error: IRQ chosen for driver does not match adapter
configuration XXXXXX Equinox Megaport STREAMS
Device Driver.
UnixWare Installation Insert Intuity Image Tape
Please insert the INTUITY Image cartridge tape into the tape drive
and press 'ENTER'.
Your choices are:
1. The tape has been inserted in the tape drive.
2. Go back to previous menu.
ENTER