Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Installing Base System Software
Page 8-18Installing UnixWare
8
The system displays the UnixWare Installation screen (Figure 8-15).
Figure 8-15. Hard Disk Surface Analysis Screen
2. Remove the Lucent I
NTUITY UNIX Boot Floppy 2 of 3 from the floppy disk
drive.
3. Continue with the next procedure, “Copying the Unix System Files
.”
Copying the Unix System Files
To copy the Unix system files, do the following:
1. Insert the diskette labeled “Lucent I
NTUITY UNIX Boot Floppy 3 of 3” into
the floppy disk drive.
2. Press .
The system displays the following message:
Copying Unix System files from the diskette onto you
hard drive. This will take a few minutes. Please wait.
The system then displays the following message:
Making file systems on your hard disk. This will take a
few minutes. Please wait
The system displays the Remove Diskette screen (Figure 8-16
).
UnixWare Installation Exchange Diskette
Remove the diskette from the drive and insert the diskette labeled
“Boot Floppy 3 of 3”.
Press ‘Enter’ to continue
ENTER