Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Installing Base System Software
Page 8-14Installing UnixWare
8
Figure 8-11. Secondary Hard Disk Partitioning Screen
Partitioning Hard Disk Drive 1
NOTE:
This screen will not appear if you do not have a second hard disk drive.
Continue with the next procedure, “Choosing the Installation Type
.”
To partition Hard Disk Drive 1, do the following:
1. Starting at the Secondary Hard Disk Partitioning screen (Figure 8-11
),
select “1”.
2. Press .
The system displays the Installation Type Selection screen (Figure 8-12
).
3. Continue with the next procedure, “Choosing the Installation Type
.”
You may use a partition of your secondary hard disk. If you choose
to use a partition of your secondary hard disk you will be shown a
screen that will allow you to partition your secondary hard disk.
WARNING: All files in any partition(s) you delete will be
destroyed.
If you choose to create a UNIX System partition on your secondary
hard disk, it must be at least 40 MBs.
Your Options are:
1. Do not use a partition of the secondary hard disk for
the UNIX System.
2. Use a partition of the secondary hard disk for the
UNIX System.
ENTER