Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Installing Base System Software
Page 8-8Installing UnixWare
8
Figure 8-5. Configure Date and Time Screen
Configuring the System Date and Time
To configure the system date and time, do the following:
1. Starting at the Configure Date and Time screen (Figure 8-5
), use the left
and right arrows on your keyboard to move through the field
selections. Use the down arrow to move to the next field.
2. Select the appropriate data for each field.
3. Press the down arrow to move to the Apply field and press .
The system displays the Continent Location Choice screen (Figure 8-6
).
4. Continue with the next procedure, “Choosing the Continent Location
.”
Unixware Installation Configure Date and Time
On this screen, you will check the current date and time that is
set on your computer and change them if necessary. You also select
what timezone configuration you require. Either set a continent(s)
which will lead you onto a further screen with locations or manual
entry for a custom timezone.
The current date:
The current Time:
Enter the current year:
Enter the month of the year:
Enter the day of the month:
Enter the hour of the day:
Enter the minute of the hour:
Timezone configuration:
Press ‘TAB’ to move the cursor between fields. When finished, move
the cursor to ‘APPLY’ and then press ‘ENTER’ to continue.
Apply Reset
ENTER