Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Replacing Other Components
Page 7-30Motherboard Replacement
7
Table 7-1. CMOS Settings
Option Setting
Basic System Configuration
IDE0 AUTO
IDE1 AUTO
IDE2 AUTO
IDE3 AUTO
On-board IDE Controller Disabled
Hard Disk Block Mode Disabled
Advanced PIO Mode Disabled
Hard Disk Size >504 MB Disabled
Hard Disk 32 Bit Access Disabled
Large Memory Support Mode Normal
Number Lock After Boot Enabled
Memory Test Enabled
Quiet Boot Enabled
Configuration Table Disabled
Advanced System Configuration
Internal Cache (CPU Cache) Enabled
External Cache Enabled
Cache Scheme Write Back
ECC/Parity Mode Selection Parity
Memory @ 15MB-16MB Reserved for [System] use
Power Saving Configuration
Power Management Mode Disabled
Power Saving Operation Mode [Traditional]
IDE Hard Disk Standby Timer Off
Monitor Power Saving Timer Off
System Standby Timer Off
System Suspend Timer Off
IRQ2, IRQ9 Disabled
Continued on next page