Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Replacing Other Components
Page 7-29Motherboard Replacement
7
4. Attach any cables which were connected to the following ports in the back
of the MAP/5P (Figure 7-8
).
■ Video port
■ Keyboard port
■ COM1
■ COM2
■ Parallel port
■ I/O port
Restoring the Lucent INTUITY System
To restore the Lucent INTUITY system , do the following:
1. Restore power to the MAP/5P. See “Restoring Power to the MAP/5P
” in
Chapter 4, ‘‘Getting Inside the Computer’’
,” for the procedure.
2. Verify the CMOS settings by completing the following Steps a through e
:
a. When prompted, press
- -
The system displays the CMOS Configuration screen
(Figure 7-13
).
Figure 7-13. CMOS Configuration Screen
b. Compare the CMOS settings with those listed in Table 7-1
.
Use the up and down arrows to move the cursor between
fields. Use the left and right arrows to change the value of the
field. Use the key to return to the previous menu.
CONTROL ALT ESC
Basic System Configuration
Advanced System Configuration
Power Saving Configuration
System Security
PnP/PCI System Configuration
ESC