Instruction manual
INTUITY Messaging Solutions Release 4
MAP/5P Maintenance
585-310-186
Issue 3
October 1997
Replacing Other Components
Page 7-3Cartridge Tape Drive Replacement
7
Figure 7-2. Cartridge Tape Drive
Cartridge Tape Drive Removal
To remove a cartridge tape drive, you must:
■ Remove the Lucent™ INTUITY™ system from service.
■ Access the cartridge tape drive.
■ Extract the cartridge tape drive.
Removing the Lucent INTUITY System from
Service
To remove the Lucent INTUITY system from service, do the following:
1. Verify that the replacement equipment is on site and appears to be in
usable condition, with no obvious shipping damage.
2. Stop the voice system. See ‘‘Stopping the Voice System’’
in Chapter 3,
‘‘Common System Procedures’’, for the procedure.
1. Jumpers 2. Terminating resistors