Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Replacing the Hard Disk Drive
Page 6-29Cleaning a Hard Disk Drive
6
disksetup(1m) command. For a DOS partiton, run the DOS
format command. Changes limited to the “Active” status
field require no additional action.
You have completed the procedure for cleaning a hard disk drive.
Performing a Low-Level Format
To low-level format a hard disk drive, do the following:
1. Reboot the system. See ‘‘Rebooting the System’’
in Chapter 3, ‘‘Common
System Procedures’’.
2. Press - when prompted.
The system displays the Host Adapter Configuration screen (Figure 6-18
).
Figure 6-18. Host Adapter Configuration Screen
3. Place the cursor on SCSI Disk Utilities. Use the up and down
arrows to move the cursor.
4. Press .
The system displays the SCSI Disk Utilities screen (Figure 6-19
).
CONTROL A
Would you like to configure the host adapter or run the SCSI disk
utilities? Select the option and press <Enter>. Press <F5> to switch
between color or monochrome.
Options
Configure/View Host Adapter Settings
SCSI Disk Utilities
ENTER