Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Replacing the Hard Disk Drive
Page 6-16Installing a Lucent I NTUITY System with Two New Hard Disk Drives
6
Installing a Lucent INTUITY System
with Two New Hard Disk Drives
To install the Lucent INTUITY system with two new hard disk drives, do the
following:
1. Install the hard disk drives. See ‘‘Hard Disk Drive 0 Installation’’
below and
‘‘Hard Disk Drive 1 Installation’’
below for the procedure.
2. Complete ‘‘Installing UnixWare’’
in Chapter 8, ‘‘Installing Base System
Software’’.
3. Clean Hard Disk Drive 1. See ‘‘Cleaning a Hard Disk Drive’’
below for the
procedure.
4. Reboot the Lucent I
NTUITY system. See ‘‘Shutting Down and Rebooting the
Lucent Intuity System’’ in Chapter 3, ‘‘Common System Procedures’’, for
the procedure.
5. Complete ‘‘Installing the INTUNIX+e Software’’
, ‘‘Running installit’’,
‘‘Installing the Platform Software’’
, and ‘‘Installing the Switch Interface
Software Packages’’ in Chapter 8, ‘‘Installing Base System Software’’.
6. Install the AUDIX software. See ‘‘Installing the Platform Software’’
in
Chapter 8, ‘‘Installing Base System Software’’
.
7. Initialize Hard Disk Drive 1. See ‘‘Initializing the New Hard Disk Drive 1’’
above for the procedure.
8. Reinstall the Lucent I
NTUITY system software. See Chapter 9, ‘‘Installing
Lucent™ Intuity™ System Software’’.
9. Reinstall the multi-user software, if used. See Chapter 10, ‘‘Installing the
Optional Feature Software’’.
10. If you are installing a system equipped with a DCIU circuit card, install the
corresponding software. See ‘‘Installing the DCIU Switch Integration Set’’
in Chapter 8, ‘‘Installing Base System Software’’
, for the procedure.
11. Reboot the Lucent I
NTUITY system. See ‘‘Shutting Down and Rebooting the
Lucent Intuity System’’ in Chapter 3, ‘‘Common System Procedures’’, for
the procedure.
12. Stop the voice system. See ‘‘Stopping the Voice System’’
in Chapter 3,
‘‘Common System Procedures’’, for the procedure.
13. Restore the attended and unattended backup tapes, beginning with the
oldest first. See ‘‘Restoring Backups’’
in Chapter 3, ‘‘Common System
Procedures’’, for the procedure.