Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Replacing the Hard Disk Drive
Page 6-14Recovering from a Hard Disk Drive 1 Failure
6
Recovering from a Hard Disk Drive 1
Failure
The following procedure explains how to replace Hard Disk Drive 1 on an existing
Lucent I
NTUITY system.
Preparing the Lucent INTUITY System
To prepare the Lucent INTUITY System, do the following:
1. Perform an attended backup. See ‘‘Backing Up (Attended)’’
in Chapter 3,
‘‘Common System Procedures’’, for the attended back-up procedure.
2. If your system has alarm origination, activate alarm suppression by
completing the following Steps a through d
:
a. Starting at the Lucent I
NTUITY Main menu (Figure 6-1), select
The system displays the Alarm Management window (Figure 6-4
).
b. Move the cursor to the
Alarm Suppression
field and type
active
c. Press (Save).
The system displays the Information window (Figure 6-5
).
d. Press .
The system displays the Alarm Management window (Figure 6-4
).
Inserting Hard Disk Drive 1
See ‘‘Replacing Hard Disk Drive 1’’ below for the procedure. Continue with the
next step, ‘‘Initializing the New Hard Disk Drive 1’’
.
Initializing the New Hard Disk Drive 1
See ‘‘Initializing the New Hard Disk Drive 0’’ above for the procedure. Continue
with the next step, ‘‘Restoring the Lucent
Intuity System’’.
> Alarm Management
> Customer/Services Administration
F3
ENTER