Instruction manual

ManualsBrandsEicon Networks ManualsComputer equipmentC20

Printed in U.S.A.

Notice

Every effort was made to ensure that the information in this book was com-

plete and accurate at the time of printing. However, information is subject to

change.

Your Responsibility for Your System’s Security

Toll fraud is the unauthorized use of your telecommunications system by an

unauthorized party, for example, persons other than your company’s

employees, agents, subcontractors, or persons working on your company’s

behalf. Note that there may be a risk of toll fraud associated with your tele-

communications system and, if toll fraud occurs, it can result in substantial

additional charges for your telecommunications services.

You and your system manager are responsible for the security of your sys-

tem, such as programming and configuring your equipment to prevent unau-

thorized use. The system manager is also responsible for reading all

installation, instruction, and system administration documents provided with

this product in order to fully understand the features that can introduce risk

of toll fraud and the steps that can be taken to reduce that risk. Lucent Tech-

nologies does not warrant that this product is immune from or will prevent

unauthorized use of common-carrier telecommunication services or facili-

ties accessed through or connected to it. Lucent Technologies will not be

responsible for any charges that result from such unauthorized use.

Lucent Corporate Security

Whether or not immediate support is required, all toll fraud incidents involv-

ing Lucent products or services shoud be reported to Lucent Corporate Secu-

rity at 1 800 821-8235. In addition to recording the incident, Lucent

Corporate Security is available for consultation on security issues, investiga-

tion support, referral to law enforcement agencies, and educational pro-

grams.

Lucent Technologies Fraud Intervention

If you suspect that you are being victimized by toll fraud and you need tech-

nical support or assistance, call the Lucent Technologies National Customer

Care Center Toll Fraud Intervention Hotline at 1 800 643-2353.

Federal Communications Commission Statement

Part 15: Class A Statement. This equipment has been tested and found to

comply with the limits for a Class A digital device, pursuant to Part 15 of the

FCC Rules. These limits are designed to provide reasonable protection

against harmful interference when the equipment is operated in a commer-

cial environment. This equipment generates, uses, and can radiate radio-fre-

quency energy and, if not installed and used in accordance with the

instruction manual, may cause harmful interference to radio communica-

tions. Operation of this equipment in a residential area is likely to cause

harmful interference in which case the user will be required to correct the

interference at his own expense.

Part 68: Network Registration Number. This equipment is registered with

the FCC in accordance with Part 68 of the FCC Rules. It is identified by an

FCC registration number.

Part 68: Answer-Supervision Signaling. Allowing this equipment to be

operated in a manner that does not provide proper answer-supervision sig-

naling is in violation of Part 68 Rules. This equipment returns answer-super-

vision signals to the public switched network when:

• Answered by the called station

• Answered by the attendant

• Routed to a recorded announcement that can be administered by the

CPE user

This equipment returns answer-supervision signals on all DID calls for-

warded back to the public switched telephone network. Permissible excep-

tions are:

• A call is unanswered

• A busy tone is received

• A reorder tone is received

Canadian Department of Communications (DOC)

Interference Information

This digital apparatus does not exceed the Class A limits for radio noise

emissions set out in the radio interference regulations of the Canadian

Department of Communications.

Le Présent Appareil Nom

érique n’é

met pas de bruits radio

lectriques d

pas-

sant les limites applicables aux appareils num

riques de la class A pr

scrites

dans le reglement sur le brouillage radio

lectrique

dict

par le minist

re des

Communications du Canada.

Trademarks

See the section titled “About This Book.”

Ordering Information

Call: Lucent Technologies Publications Center

Voice 1 800 457-1235 International Voice 317 361-5353

Fax 1 800 457-1764 International Fax 317 361-5355

Write: Lucent Technologies Publications Center

P.O. Box 4100

Crawfordsville, IN 47933

You can be placed on a standing order list for this and other documents you

may need. Standing order will enable you to automatically receive updated

versions of individual documents or document sets, billed to account infor-

mation that you provide. For more information on standing orders, or to be

put on a list to receive future issues of this document, contact the Lucent

Technologies Publications Center.

Warranty

Lucent Technologies provides a limited warranty on this product. Refer to

the “Limited Use Software License Agreement” card provided with your

package.

European Union Declaration of Conformity

Lucent Technologies Business Communications Systems declares that the

equipment specified in this document conforms to the referenced European

Union (EU) Directives and Harmonized Standards listed below:

EMC Directive 89/336/EEC

Low-Voltage Directive 73/23/EEC

The “CE” mark affixed to the equipment

means that it conforms to the above

directives.

Comments

To comment on this document, return the comment card at the front of the

document.

Acknowledgment

This document was prepared by Product Documentation, Lucent Technolo-

gies, Columbus, OH.