Instruction manual

INTUITY Messaging Solutions Release 4

MAP/5P Maintenance

585-310-186

Issue 3

October 1997

Replacing or Installing Circuit Cards

Page 5-43Installing a Remote Maintenance Circuit Card, Version 2

Attaching Cables to the Circuit Card

The type and number of cables depend upon the platform. See Figure 5-29 to

distinguish among the cables that may be present in each of the platforms. The

following list details cabling requirements:

■ MAP/5P – MAP/5P reset cable

■ MAP/40 – 486 reset cable

■ MAP/40P - keyboard cable

■ MAP/100 – fan-status cable and 486 reset cable

(If the MAP/100 has an internal UPS, connect the UPS cable)

WARNING:

If the UPS cable is connected to a MAP/100 with dual/redundant power

supplies, then damage to the RMB results when power is supplied to the

platform.

Figure 5-29. RMB cables

UPS cableFan-status cable

486/Pentium

reset cable

MAP/5P

MAP/60

reset cable

cbr2mult LJK 050297