Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Replacing or Installing Circuit Cards
Page 5-30Circuit Card Settings
5
4. Select
Tape drive
.
The system displays the following message:
Insert a cartridge into Tape Drive 1.
Type [go] when ready,
or [q] to quit: (default:go)
5. Insert the tape labeled “RMB Software Set” into the tape drive.
6. Press .
The system displays the following message:
Installation in progress. Do not remote the cartridge
tape.
The following sets are available:
1 RMBset Remote Maintenance Board Package
(AYC54/55)
Select package(s) you wish to process (or ‘all’ to
process all packages). (default: all) [?,??,q]
7. Press .
The system displays the following message:
Processing:
Set: RMB Software Set R2.0 (RMBset) from <ctape1>.
Intuity RMB Software Set R2.0
(i486)
Using </> as the package base directory.
Please select the country code:
01 - United States
02 - International
Country code [01]:
8. Enter the appropriate code.
The system displays the following message:
Insert a cartridge into Tape Drive 1.
Type [go] when ready
or [q] to quit: (default: go)
9. Enter q
10. Remove the cartridge tape.
11. Start the voice system. See ‘‘Starting the Voice System’’
in Chapter 3,
‘‘Common System Procedures’’, for the procedure.
ENTER
ENTER