Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Replacing or Installing Circuit Cards
Page 5-24Circuit Card Settings
5
Table 5-1. Host Adapter Settings
Option Setting
SCSI Bus Interface Definitions
Host Adapter SCSI ID 7
SCSI Parity Checking Enabled
Host Adapter SCSI Termination Automatic
Boot Device Options
Boot Target ID 0
Boot Lun Number 0
SCSI Device Configuration
Initiate Sync Negotiation Yes (Enabled)for all IDs
Maximum Sync Transfer Rate 20 Mbytes/sec for all IDs
Enable Disconnection Yes (Enabled)for all IDs
Send Start Unit Command No (Disabled)for all IDs
Initiate Wide Negotiation Yes (Enabled)for all IDs
Advanced Host Adapter Settings
Plug and Play SCAM Support Disabled
Host Adapter BIOS Enabled
Support Removable Disks Under
BIOS as Fixed Disks
Boot only
Extended BIOS Translation for DOS
Drives > 1 Gbyte
Enabled
Display <CTRL-A> Message During
BIOS Initialization
Enabled
Multiple LUN Support Disabled
BIOS Support for Bootable CD-ROM Enabled
BIOS Support for Int 13
Extensions
Enabled
Support for Ultra SCSI Speed Disabled