Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Replacing or Installing Circuit Cards
Page 5-17Circuit Card Settings
5
6. Enter the IP address.
The system displays the following message:
Configure host XXX with default Ethernet(TM)ifconfig
options?
Info message is long. (yes no ClassC BerkeleyC info;
default: info)
7. Enter the
ClassC
.
The system displays the system prompt.
Tip/Ring Circuit Cards
Tip/Ring circuit cards provide the channels which are used by the Lucent INTUITY
system. There are six channel on each Tip/Ring circuit card. The MAP/5P
accommodates three Tip/Ring circuit cards.
The Lucent I
NTUITY system supports three types of Tip/Ring circuit cards.
■ AYC10 (IVC6) Tip/Ring circuit card
■ AYC29 (IVC6A) Tip/Ring circuit card
■ AYC30 (NGTR) Tip/Ring circuit card
AYC10 (IVC6) Tip/Ring Circuit Card
Figure 5-10 show the AYC10 Tip/Ring circuit card.