Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Replacing or Installing Circuit Cards
Page 5-16Circuit Card Settings
5
Figure 5-9. SMC LAN Adapter Setup Screen
2. Make sure your settings match those shown in Figure 5-9
.
3. Enter
/etc/confnet.d/configure -i
The system displays the following message:
These are the device(s) available on your system:
1 sme_0
Type the number of the device(s) to be configured with
inet [?,??,q]
4. Enter the appropriate number.
The system displays the following message:
Please enter the IP host name for device sme_0:
5. Enter the your machine name.
!
CAUTION:
Do not take the default.
The system displays the following message:
Please initialize the IP address for host XXX:
SMC LAN Adapter Setup Program -- Version 1.21
Board Type: 8416
Node Address:
Current Setup
I/O Base Address 280
IRQ 10
RAM Size 8 K
WIN Size 8 K
RAM Base Address 0D8000
Add Wait States Yes
Network Connection TwPr-No Link
Link Integrity Disabled
ROM Size Disabled
ROM Base Address Disabled
Pnpboot Disabled
Do you want to change the setup? (y)->