Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Replacing or Installing Circuit Cards
Page 5-11Circuit Card Settings
5
You can install only one DCIU circuit card in the MAP/5P.
Figure 5-6. DCIU Circuit Card
Setting the Resource Options
The DCIU circuit card contains no jumpers or switches that you must set before
you install the circuit card.
Replacing a DCIU Circuit Card
See “General Procedures” for the DCIU circuit card removal and installation
procedures.
Installing a DCIU Circuit Card
Use the following procedure to install a DCIU circuit card in a system which
previously did not have a DCIU circuit card installed.
1. Stop the voice system. See ‘‘Stopping the Voice System’’
in Chapter 3,
‘‘Common System Procedures’’, for the procedure.
2. Install the Lucent I
NTUITY DCIU Switch Integration set. See “Installing the
DCIU Switch Integration Set” in Chapter 8, ‘‘Installing Base System
Software’’ for the procedure.
dciu KLC 080696
M/M gende
r
changer
connector
LED
(green)