Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Replacing or Installing Circuit Cards
Page 5-5General Procedures
5
Restoring the Lucent INTUITY System to Service
To restore the Lucent INTUITY system to service, do the following:
1. Restore power to the MAP/5P. See “Restoring Power to the MAP/5P
” in
Chapter 4, ‘‘Getting Inside the Computer’’
, for the procedure.
2. Verify the Lucent I
NTUITY system operation by placing a call to a user.
3. Verify the installation of the circuit card by doing the following:
NOTE:
This procedure will only verify the installation of Tip/Ring and ACCX
circuit cards.
a. Start at the Lucent I
NTUITY Main menu (Figure 5-1).
Figure 5-1. Lucent INTUITY Main Menu
b. Select
The system displays the View Installed Hardware window
(Figure 5-2
).
> View Installed Hardware
> System Verification
> Customer/Services Administration