Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance
585-310-186
Issue 3
October 1997
Getting Inside the Computer
Page 4-8Replacing the Dress Cover
4
Replacing the Dress Cover
To replace the dress cover, do the following:
1. Align the dress cover with the MAP/5P chassis.
2. Slide the dress cover back until it locks into place.
3. Close the dress cover lock on the back of the MAP/5P chassis.
Restoring Power to the MAP/5P
To restore power to the MAP/5P, do the following:
1. Plug the MAP/5P power cord into the designated power outlet.
2. Fasten the power cord to the MAP/5P dress cover lock using a cable tie.
NOTE:
Leave some slack in the power cord between the dress cover lock
and the back of the MAP/5P.
3. Turn on the monitor’s power switch.
The green or amber lamp on the front bottom of the monitor should be lit.
4. Press on the power switch on the front of the MAP/5P.
The green lamp on the front of the unit should be lit.