Instruction manual

INTUITY Messaging Solutions Release 4

MAP/5P Maintenance

585-310-186

Issue 3

October 1997

Common System Procedures

Page 3-31Verifying the Date and Time

Figure 3-16. UNIX Time Zone Choices Menu

2. Use or to move the cursor and highlight the correct time zone.

3. Press to place the name of the correct time zone into the

Timezone

field.

If the time zone shown is correct, press for no change and continue with

the next procedure, ‘‘Changing the Is Daylight Savings Time Used Field’’

Changing the Is Daylight Savings Time Used

Field

1. Type

for yes or

for no depending upon whether or not daylight savings

time is used at any time during the year.

2. Press (Save) to save the changes and continue with the next

procedure, ‘‘Acknowledging the Changes to the Date and Time Window’’

Acknowledging the Changes to the Date and

Time Window

After the changes have been made to the Date and Time window the user must

ensure that the system recognizes the new information. To acknowledge the new

information, do the following:

1. Reboot the Lucent I

NTUITY system. See “Shutting Down and Rebooting the

Lucent Intuity System” above for the procedure.

At this time the date and time changes will take effect.

ENTER