Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Common System Procedures
Page 3-30Verifying the Date and Time
3
Changing the Day
If the day of the month shown is not correct, enter the correct day as a number
from 1 to 31 and continue with the next procedure, ‘‘Changing the Year’’
.
If the day of the month shown is correct, press for no change and
continue with the next procedure, ‘‘Changing the Year’’
.
Changing the Year
If the year shown is not correct, enter the correct year as a number from 1996 to
2038 and continue with the next procedure, ‘‘Changing the Time Field’’
.
If the year shown is correct, press for no change and continue with the
next procedure, ‘‘Changing the Time Field’’
.
Changing the Time Field
If the time shown is not correct, enter the correct time in the form of
hours:minutes and continue with the next procedure, ‘‘Changing the AM/PM
Field’’.
NOTE:
Use a 12-hour a.m./p.m. standard. Do not use the 24-hour military
standard.
If the time shown is correct, press for no change and continue with the
next procedure, ‘‘Changing the AM/PM Field’’
.
Changing the AM/PM Field
If
AM/PM
is not correct as shown, type
a
for a.m. or
p
for p.m. and continue with
the next procedure, ‘‘Changing the Time Zone Field’’
.
If
AM/PM
is correct as shown, press for no change and continue with the
next procedure, ‘‘Changing the Time Zone Field’’
.
Changing the Time Zone Field
If the time zone shown is not correct, complete the following Steps 1 through 3
and continue with the next procedure, ‘‘Changing the Is Daylight Savings Time
Used Field’’.
1. Press (Choices) to display the list of time zones (Figure 3-16
).
ENTER
ENTER
ENTER
ENTER
F2