Instruction manual

INTUITY Messaging Solutions Release 4
MAP/5P Maintenance 585-310-186
Issue 3
October 1997
Common System Procedures
Page 3-29Verifying the Date and Time
3
Changing the UNIX Date and Time Window
The user can change any of the displayed fields. To change one field in the Date
and Time window, the user must either change or acknowledge the information in
each field.
Changing the Date Field
The date field contains the month, day, and year.
Changing the Month
1. Place the cursor on the
Month
field in the UNIX Date and Time window
(Figure 3-14
).
2. If the month shown is not correct, complete Steps a through c below:
a. Press (Choices) to display the months of the year (Figure 3-15
).
Figure 3-15. UNIX Month Choices Menu
b. Use or to move the cursor and highlight the correct month.
c. Press to place the name of the correct month into the month
field.
NOTE:
The user can also select the current month by entering the
corresponding alphabetic abbreviation from this list: Ja, F,
Mar, Ap, May, Jun, Jul, Au, S, O, N, D.
Continue with the next procedure, ‘‘Changing the Day’’
.
If the month shown is correct, press for no change and continue
with the next procedure, ‘‘Changing the Day’’
.
F2
ENTER
ENTER